Deck light fixtures are a great addition to any deck. Not only do they add beauty and worth to your property, they make your deck safer to utilize at evening by adding illumination and highlighting potentially risky obstacles. A single extremely well-known kind of deck lighting may be the flush mounted deck light. Coming in round or rectangular shapes, these lights install even using the floor of your deck and are protected to walk on. The following is really a brief explanation of the way to install these lights.
Tools and Supplies Needed
* Safety glasses
* Electric drill
* Drill bits (verify light specifications for sizing)
* Staple gun
* 12 Volt outdoor lighting wire
* Electrical tape
* Flush mount deck lights
* Low voltage transformer
Step 1 - Choose Location for Lights
Employing a pencil and some paper, make a speedy drawing of the deck and deck furniture. Use this sketch to determine where you need to spot your lights and the transformer. It is possible to also use this sketch to help strategy how to run the wiring.
Step 2 - Drill Holes for the Lights
Employing your drawing, arrange the lights across the deck. Following manufacturer's directions to select the proper sized drill bits, drill sockets into the deck floor. Make certain that you happen to be drilling straight in to the wall; should you drill at an angle, the sockets may possibly wiggle out of place. Each socket should be just deep adequate to ensure that the top of the light will be level together with the top of one's deck.
Step 3 - Fitting the Lights
The moment the sockets are drilled, drop the lights into location.
Step 4 - Connecting the Wiring
Beneath the deck, make sure the leads on the lights are connected for the 12 Volt outdoor lighting wire. Then, in order to get energy, hook the outdoor lighting wire to your transformer or circuit box. Finally, in order to avert any risky accidents, cover any locations exactly where the wires connect with electrical tape.
0 Comments:
Post a Comment